Setup Router logo in white Setup router name logo in white
Get Software

Arris WTM552 Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Arris WTM552 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Arris WTM552 Guides

This is the port forwarding guide for the Arris WTM552. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Arris WTM552 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Arris WTM552

To get started forwarding a port you need to login to your Arris WTM552 router. If you are already logged in you can skip this step.

To login to the Arris WTM552, follow our Arris WTM552 Login Guide.

Forward a Port on the Arris WTM552 router

Find The Port Forwarding Section of the Arris WTM552

router status mac address internet IP
This is the status page from your Arris WTM552 router.

Once you have logged into the Arris WTM552 you should begin on the Status page of your router. First click the choice o the left side of the page, in blue, labeled Firewall, then Virtual Servers.

Configure the Port Forwarding section of your Arris WTM552

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Arris WTM552 router.

You are now on a page like this one. First, put a check mark in the box labeled Enable.

In Description type the name of the program. It doesn't really matter what you put here, so long as it reminds you of why you did this.

If you are forwarding a single port, enter that port number into both the Inbound port and Private port boxes. If you are forwarding multiple ports, enter the lowest number in the range in the left hand box of both Inbound port and Private port. The highest number in the port range in the right hand box of both Inbound port and Private port.

Next is the drop down menu labeled Type. Use this drop down menu to choose the type of protocol you are going to use for these ports.

Now, in the box labeled Private IP address enter the IP Address you are forwarding these ports to, if you are forwarding these to run a program on your computer, be sure and use that computer's IP Address.

Near the top of the screen is a Save button, click this before you leave, and you are finished, congratulations.

Test if Your Ports are Open

Now that you have forwarded ports on the Arris WTM552 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Arris WTM552 Info

Don't forget about our other Arris WTM552 info that you might be interested in.

This is the port forwarding guide for the Arris WTM552. We also have the following guides for the same router: