Setup Router logo in white Setup router name logo in white
Get Software

Arris WTM652G Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Arris WTM652G router.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Arris WTM652G Guides

This is the port forwarding guide for the Arris WTM652G. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Arris WTM652G to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Arris WTM652G

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

To get started forwarding a port you need to login to your Arris WTM652G router. If you are already logged in you can skip this step.

To login to the Arris WTM652G, follow our Arris WTM652G Login Guide.

Forward a Port on the Arris WTM652G router

Find The Port Forwarding Section of the Arris WTM652G

router status mac address internet IP
This is the status page from your Arris WTM652G router.

Now that you have finished logging into the Arris WTM652G you begin on the Status page. Click the choice on the left side of the page labeled Firewall, then under that, Virtual Servers.

Configure the Port Forwarding section of your Arris WTM652G

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Arris WTM652G router.

You are now on a page like the one you see above. In the first box labeled Enable put a check mark in this box.

Second, enter the name of the program in the box labeled Description. It is not essential what you put in this box, it should just be something that reminds you of why you are forwarding these ports.

If you happen to be forwarding only one port, then enter this number in both of the boxes that are labeled Inbound port and Private port. If you are forwarding multiple ports then you need to enter the lowest number of the range in the left box of both Inbound port and Private port and the highest number of the range in the right box of both Inbound port and Private port.

Next is the Type, use the drop down menu to choose the type of protocol you are going to use for these ports.

The last one is the Private IP Address. Enter the IP Address that you are forwarding the ports to. For instance, if you are forwarding these ports to run a program on your computer, then use that computer's IP Address.

Congratulations you are finished! All that is left is to click the Save button.

Test if Your Ports are Open

Now that you have forwarded ports on the Arris WTM652G you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Arris WTM652G Info

Don't forget about our other Arris WTM652G info that you might be interested in.

This is the port forwarding guide for the Arris WTM652G. We also have the following guides for the same router: