This is the reset guide for the Arris WTM652G router. Some of you may be confused about the difference between resetting a router and rebooting a router. Rebooting a router cycles the power to the device by turning it off and turning it back on again. Resetting your router erases everything you have done to the device and returns it to factory defaults.
Tip: Resetting this router is serious and should only be done once you know what will change when you are finished. Consider the following:
- Your router's main username and password are reset.
- All WiFi information such as SSID, password, and security are reset.
- ISP info is erased so you may need to re-enter a username and password if you use DSL.
- All configurations such as firewall changes, port forwards, or even IP address changes are erased.
Other Arris WTM652G Guides
This is the reset router guide for the Arris WTM652G. We also have the following guides for the same router:
- Arris WTM652G - How to change the IP Address on a Arris WTM652G router
- Arris WTM652G - Arris WTM652G Login Instructions
- Arris WTM652G - Arris WTM652G User Manual
- Arris WTM652G - Arris WTM652G Port Forwarding Instructions
- Arris WTM652G - Setup WiFi on the Arris WTM652G
- Arris WTM652G - Information About the Arris WTM652G Router
- Arris WTM652G - Arris WTM652G Screenshots
Reset the Arris WTM652G
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
To reset this Arris WTM652G router the first step is keep it on. Turning the router off or unplugging it could cause permanent damage.
Now you need to locate the correct reset button. This router has two. The one titled TM Reset is somewhat misleading as it more like a reboot. The upper one is titled Router Reset which is the true reset button for your router. We have circled it's location for you in the image below.
Taking a pen or tip of a sharp pencil press and hold the reset button for around 10 seconds.
Don't forget that this erases everything you have done to personalize this device. Make sure you have exhausted other troubleshooting options first.
Login to the Arris WTM652G
Now that you have finished resetting this Arris WTM652G router you should login using the factory default username and password. We have found these for you and included them in the Login Guide for the Arris WTM652G router.
Change Your Password
After logging into the Arris WTM652G you should change the password as well. We have a page with helpful tips and ideas for you if you want. Check it out here at our Creating a Strong Password page.
Tip: Write this password down somewhere you won't lose it. For some it may need to be taped to the bottom of the router for safe keeping.
Setup WiFi on the Arris WTM652G
The last setting we urge you to change is the WiFi setting. Since this has been reset as well you could have a disabled security mode. This means everyone within range can use your WiFi with or without your permission. Change your security mode to WPA2-PSK as soon as possible. If you need instructions on this, use our How to Setup WiFi on the Arris WTM652G guide.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Arris WTM652G Help
Be sure to check out our other Arris WTM652G info that you might be interested in.
This is the reset router guide for the Arris WTM652G. We also have the following guides for the same router:
- Arris WTM652G - How to change the IP Address on a Arris WTM652G router
- Arris WTM652G - Arris WTM652G Login Instructions
- Arris WTM652G - Arris WTM652G User Manual
- Arris WTM652G - Arris WTM652G Port Forwarding Instructions
- Arris WTM652G - Setup WiFi on the Arris WTM652G
- Arris WTM652G - Information About the Arris WTM652G Router
- Arris WTM652G - Arris WTM652G Screenshots