Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Belkin F1PI243EGau router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Belkin F1PI243EGau router.

Other Belkin F1PI243EGau Guides

This is the ip address guide for the Belkin F1PI243EGau. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Belkin F1PI243EGau

To get started configuring the Belkin F1PI243EGau LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Belkin F1PI243EGau, follow our Belkin F1PI243EGau Login Guide.

Change the LAN IP Address on a Belkin F1PI243EGau

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Belkin F1PI243EGau router.

Once you have signed into the Belkin F1PI243EGau you begin on the Home page of this Router. To change your IP Address, the address you can see when inside your network, click the choice labeled Advanced Setup, this is located on the left, in the orange bar. Then, pick LAN.

Configure the LAN section of your Belkin F1PI243EGau

router setup
This is the setup page from your Belkin F1PI243EGau router.

On this page, enter your new address you have picked out for your Router in the box labeled IP Address. A good address choice is 192.168.1.1

Make sure that while you make this change, you do not change the IP Subnet Mask, this should stay at 255.255.255.0

Finally, make sure to save before you exit.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Belkin F1PI243EGau Info

Don't forget about our other Belkin F1PI243EGau info that you might be interested in.

This is the ip address guide for the Belkin F1PI243EGau. We also have the following guides for the same router: