Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Belkin F5D8235-4

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 5 minutes

In this guide we will show you how to reset the Belkin F5D8235-4v1 router back to factory defaults. There is some confusion about the difference between resetting a router and rebooting a router. Rebooting the router is simply restarting the device in order to cycle the power. When you want to reset a router you want to take all the settings and return them back to factory defaults.

Warning: Resetting this router is can cause problems for you if you don't know what settings have been changed. One good idea is to create a list of settings you know will be changed. While making this list consider the following:

  • The router's interface username and password.
  • The WiFi SSID, password, and security type.
  • The ISP username and password if you have DSL.
  • Other settings you have personalized such as port forwards or IP addresses.

Other Belkin F5D8235-4 Guides

This is the reset router guide for the Belkin F5D8235-4 1.01.19. We also have the following guides for the same router:

Reset the Belkin F5D8235-4

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Once you have decided to reset this router you need to locate the reset button. For the Belkin F5D8235-4v1 router it is located on the back panel. We have circled it in red for you in the image below.

router reset factory settings
This is the reset page from your Belkin F5D8235-4 router.

Take an unwound paperclip or pin to press and hold the reset button for about 10 seconds. A lesser amount of time will only reboot the router instead of a factory reset.

Be careful and don't forget that this erases every setting you have ever changed in the router's interface. It's a good idea to try other troubleshooting methods before you continue.

Login to the Belkin F5D8235-4

After you have completed the Belkin F5D8235-4v1 reset you will need to login using the proper default username and password. These can be found several places. The user manual, the device itself, or the manufacturers website support. We have found this information for you and included it in our Belkin F5D8235-4v1 Login Guide.

Change Your Password

The next order of business is the password. It is never a good idea to leave a password as it's default especially if by default there is no password. Change this to protect your router's interface. To create a good password follow the tips in our Choosing a Strong Password guide.

Tip: As long as your router is in a secure location it's okay to write this password down on a piece of paper and attach it to the bottom of the router for future reference.

Setup WiFi on the Belkin F5D8235-4v1

The last item I will discuss in this guide is the Belkin F5D8235-4v1 WiFi settings. You need to change the SSID and password and check the security of the router. Some router manufacturers like to have the default security be the strongest form available. Belkin leaves the security disabled as the default. Do not leave it this way. The strongest form of security is WPA2-PSK. Please take a look at our How to Setup WiFi on the Belkin F5D8235-4v1 guide for the steps in creating a truly secure wireless network.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Belkin F5D8235-4 Help

Be sure to check out our other Belkin F5D8235-4 info that you might be interested in.

This is the reset router guide for the Belkin F5D8235-4 1.01.19. We also have the following guides for the same router: