How to Reset the Belkin F5D8235-4

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 5 minutes

In this guide I will show you how to reset the Belkin F5D8235-4v2 router back to it's original factory defaults. There is confusion between the terms reset and reboot. Rebooting a router is simply restarting it in order to cycle the power to the device. Resetting a router is taking all the settings and returning them to how they were from the factory.

Warning: Every setting is potentially changed. Problems occur after a reset if you don't know what settings have been changed. We have created a partial list of items that are changed:

  • The router's user interface username and password.
  • The WiFi SSID, password, and security method.
  • The ISP username and password if you happen to use DSL. Call your ISP for this information.
  • Any other settings you have changed since you got the router. This could be anything from a port forward to an IP address change.

Other Belkin F5D8235-4 Guides

This is the reset router guide for the Belkin F5D8235-4 2.01.09. We also have the following guides for the same router:

Reset the Belkin F5D8235-4

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

After you decide to reset this router you need to find it's reset button. Typically this button is a tiny, recessed button on the back panel of the device. We have found it for you and circled it's location in red. See the image below.

router reset factory settings
This is the reset page from your Belkin F5D8235-4 router.

Take the end of a pin or other small object to depress and hold the reset button for about 10 seconds. If you happen to just click the reset button you will simply reboot it instead of resetting it.

Please don't forget that this will erase every setting you have ever changed in the past. Try other ways of fixing this problem before you decide to reset.

Login to the Belkin F5D8235-4

Now you need to login to the Belkin F5D8235-4v2 router. Use the default username and password. We have found this information for you and included it in our Login Guide for the Belkin F5D8235-4v2.

Change Your Password

After you have finished logging into the Belkin F5D8235-4v2 it's very important to change the default password, especially if the default password is non-existent. We have a guide titled Choosing a Strong Password that is full of helpful tips and ideas for you.

Tip: When you have finished creating a new password write it down somewhere safe. As long as your router is not in a public place you can write this password down on a piece of paper and attach it to the bottom of the router so you don't lose it.

Setup WiFi on the Belkin F5D8235-4v2

Finally let's discuss the WiFi settings. Belkin routers along with some other router manufacturers like to leave the security disabled as the default. This is extremely vulnerable to attack. Change the security to WPA2-PSK. You also need to change the SSID and the password. To create a truly secure network follow our guide titled How to Setup WiFi on the Belkin F5D8235-4v2.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Belkin F5D8235-4 Help

Be sure to check out our other Belkin F5D8235-4 info that you might be interested in.

This is the reset router guide for the Belkin F5D8235-4 2.01.09. We also have the following guides for the same router: