This page shows how to change the LAN IP Address on the Belkin F7D6301 router.
Other Belkin F7D6301 Guides
This is the ip address guide for the Belkin F7D6301 v1. We also have the following guides for the same router:
- Belkin F7D6301 v1 - Belkin F7D6301 Login Instructions
- Belkin F7D6301 v1 - Belkin F7D6301 User Manual
- Belkin F7D6301 v1 - How to change the DNS settings on a Belkin F7D6301 router
- Belkin F7D6301 v1 - Setup WiFi on the Belkin F7D6301
- Belkin F7D6301 v1 - How to Reset the Belkin F7D6301
- Belkin F7D6301 v1 - Belkin F7D6301 Screenshots
- Belkin F7D6301 v1 - Information About the Belkin F7D6301 Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Belkin F7D6301
To get started configuring the Belkin F7D6301 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Belkin F7D6301, follow our Belkin F7D6301 Login Guide.
Change the LAN IP Address on a Belkin F7D6301
If you followed our login guide above then you should see this screen.
We begin this guide on the Home page of the Belkin F7D6301v1 router. To change your IP address click LAN Settings on the left hand side of the page.
Configure the LAN section of your Belkin F7D6301
This brings you to the page shown above.
You can now change your router's IP Address. Enter your new address into the desired boxes. Don't quite know what you should change it to? One good option is 10.0.0.1
Just beneath that is the Subnet Mask. This should not be changed. Be sure to leave it at 255.255.255.0
That's all there is to it. Just be sure to click Apply Changes before closing the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Belkin F7D6301 Info
Don't forget about our other Belkin F7D6301 info that you might be interested in.
This is the ip address guide for the Belkin F7D6301 v1. We also have the following guides for the same router:
- Belkin F7D6301 v1 - Belkin F7D6301 Login Instructions
- Belkin F7D6301 v1 - Belkin F7D6301 User Manual
- Belkin F7D6301 v1 - How to change the DNS settings on a Belkin F7D6301 router
- Belkin F7D6301 v1 - Setup WiFi on the Belkin F7D6301
- Belkin F7D6301 v1 - How to Reset the Belkin F7D6301
- Belkin F7D6301 v1 - Belkin F7D6301 Screenshots
- Belkin F7D6301 v1 - Information About the Belkin F7D6301 Router