How to Reset the Belkin F9J1107

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

There is a lot of confusion between two terms pertaining to resetting a router. The first is reboot. To reboot a router simply means to cycle the power. You can do this by pressing and immediately releasing the "reset" button. This is done to solve some problems involving your router. The second term is reset. A true router reset is taking all the settings inside your router and returning every one of them back to factory defaults. This guide will cover how to properly reset the Belkin F9J1107v1 router.

Warning: A reset is a serious step. A lot of things change and need to reconfigured afterwards. Some things to consider are:

  • The router's main username and password are returned to factory defaults.
  • The Internet name and password are returned to default.
  • The ISP or Internet Service Provider username and password are erased if you have DSL. You will need to call your ISP for this information.
  • Any other settings you have changed are erased or returned to how they were from the factory. This could include anything from IP addresses to port forwards.

Other Belkin F9J1107 Guides

This is the reset router guide for the Belkin F9J1107 v1. We also have the following guides for the same router:

Reset the Belkin F9J1107

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN faster than ever deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

The first step in this reset is to find the reset button. This button is typically red, recessed, and very tiny to avoid accidental reset. We have located it in the image below and circled it for you.

router reset factory settings
This is the reset page from your Belkin F9J1107 router.

Due to the tiny and recessed nature of the button you need to use an unwound paperclip or pin to press and hold down the button for at least 10 seconds. Less than that and you are only rebooting the router.

Remember that this will erase everything you have ever done to your router. We strongly recommend trying other ways of troubleshooting your problem before you reset.

Login to the Belkin F9J1107

Next you need to login to the Belkin F9J1107v1 router. To do this you need to know the factory default IP address, username and password. We have found these for you and included them in our handy Login Guide for the Belkin F9J1107v1 router.

Change Your Password

The next step is to change the default password. Belkin likes to leave the password blank until you access it for the first time. This also means it's extremely easy for everyone to access your network. Change your password to something stronger by following the tips in the Choosing a Strong Password guide.

Tip: If your router is located in a secure place you can write this password down on a piece of paper and attach it to the bottom of the router for future reference.

Setup WiFi on the Belkin F9J1107v1

The last thing we will discuss are the WiFi settings. These need to be reconfigured. Some router manufacturers including Belkin like to leave the WiFi security disabled as the default. This makes it easier for you to connect to the Internet the first time. This in turn makes it much easier for someone else to connect to your network as well. We recommend changing this to WPA2 with a nice strong password. Follow this How to Setup WiFi on the Belkin F9J1107v1 guide for step-by-step instructions.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Belkin F9J1107 Help

Be sure to check out our other Belkin F9J1107 info that you might be interested in.

This is the reset router guide for the Belkin F9J1107 v1. We also have the following guides for the same router: