Have you been trying to login to the Belkin F9K1105v2 router and not been able to? It might be time to consider a reset. This is not the same thing as a reboot. When you reboot a router you cycle the power to the device. When you reset a router you take all the settings and return them all to factory defaults. This means all your personal data is erased.
Warning: Resetting this device is a big step in trying to fix a problem. I strongly suggest trying other methods of troubleshooting before you continue. It's also a good idea to make up a list of all the possible settings that could change because of the reset. This include:
- The router's main username and password.
- The WiFi information such as SSID, encryption and Internet password.
- Is this a DSL router? You need to re-enter the Internet Service Provider (ISP) username and password to continue using the Internet. Call your local provider for the exact details.
- What other settings have you changed in the past? Make sure to write all of these down as well.
Other Belkin F9K1105v2 Guides
This is the reset router guide for the Belkin F9K1105v2. We also have the following guides for the same router:
Reset the Belkin F9K1105v2
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
The first step in this reset is to find the reset button on the outside of the device. I have found an image of the Belkin F9K1105v2 router and circled the reset button for you in red.
While the router remains on take a sharp pen or pencil and press the reset button for at least 5 seconds. This begins the reset process. If you don't hold the reset button down for at least 5 seconds you might end up only rebooting the router instead of resetting it like you wanted.
Warning: Do not unplug or turn off the router during the reset process. This could cause permanent damage to the device.
Remember this particular type of reset erases every single setting you have ever changed on this device. We strongly encourage you to try other methods of fixing the Belkin F9K1105v2 router before you continue with this reset.
Login to the Belkin F9K1105v2
Now that the router has been reset, you will have to login to it using the default IP address, password, and username. Here at setuprouter.com we have collected this information for you and included it in our Belkin F9K1105v2 Login Guide.
Tip: Defaults not working? The router may have not been properly reset. Try resetting it again but hold down the button for a little longer this time.
Change Your Password
The next step is to change the password that you just used to access the router. Try to make your password about 14-20 characters long and have it contain no personal information. If you need any additional help for making a good password, check out our Choosing a Strong Password guide.
Tip: If you are worried about losing your password try writing it down on a slip of paper and attach it to the bottom of the router.
Setup WiFi on the Belkin F9K1105v2
Finally you can start re-configuring the router settings back to the way to like them. Make sure that you also configure the wireless network settings. For help on this important step, follow our WiFi Instructions for the Belkin F9K1105v2 router.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Belkin F9K1105v2 Help
Be sure to check out our other Belkin F9K1105v2 info that you might be interested in.
This is the reset router guide for the Belkin F9K1105v2. We also have the following guides for the same router: