Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Billion Bipac 7202GR2A router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Billion Bipac 7202GR2A router.

Other Billion Bipac 7202GR2A Guides

This is the ip address guide for the Billion Bipac 7202GR2A. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Billion Bipac 7202GR2A

To get started configuring the Billion Bipac 7202GR2A LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Billion Bipac 7202GR2A, follow our Billion Bipac 7202GR2A Login Guide.

Change the LAN IP Address on a Billion Bipac 7202GR2A

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Billion Bipac 7202GR2A router.

Once you have logged into the Billion BiPAC 7202GR2A you see the Status page. On the left there are four choices, choose the one labeled Configuration. This opens up more options, choose LAN, then Ethernet.

Configure the LAN section of your Billion Bipac 7202GR2A

router setup
This is the setup page from your Billion Bipac 7202GR2A router.

Now you can change your IP Address, the address you see when inside your network. Click the box labeled IP Address and enter the new address you have picked for your Router. We suggest using 192.168.1.1

Make sure to leave the Subnet Mask at 255.255.255.0

Don't forget to save your changes by clicking Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Billion Bipac 7202GR2A Info

Don't forget about our other Billion Bipac 7202GR2A info that you might be interested in.

This is the ip address guide for the Billion Bipac 7202GR2A. We also have the following guides for the same router: