This page shows how to change the LAN IP Address on the Bticino F444 router.
Other Bticino F444 Guides
This is the ip address guide for the Bticino F444. We also have the following guides for the same router:
- Bticino F444 - Bticino F444 Login Instructions
- Bticino F444 - Bticino F444 User Manual
- Bticino F444 - Bticino F444 Port Forwarding Instructions
- Bticino F444 - How to change the DNS settings on a Bticino F444 router
- Bticino F444 - How to Reset the Bticino F444
- Bticino F444 - Information About the Bticino F444 Router
- Bticino F444 - Bticino F444 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Bticino F444
To get started configuring the Bticino F444 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Bticino F444, follow our Bticino F444 Login Guide.
Change the LAN IP Address on a Bticino F444
If you followed our login guide above then you should see this screen.
When logging into the Bticino F444 you see the Home Page. To change your IP Address, the address you see from inside your network, click the option on the left labeled Private LAN, this will be under the heading of Configuration.
Configure the LAN section of your Bticino F444
On this new page, click the box labeled IP Address and enter the new address here. In this screenshot, someone has used the address of 192.168.1.1, we recommend using this, it is a very good choice.
Do not change the Subnet Mask, it needs to remain at 255.255.255.0
We recommend leaving the DHCP Server enabled. In this screenshot, they have it as User Defined, we recommend System Allocated, this allows your Router to choose these for you.
Finally, don't forget to save your changes by clicking Submit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Bticino F444 Info
Don't forget about our other Bticino F444 info that you might be interested in.
This is the ip address guide for the Bticino F444. We also have the following guides for the same router:
- Bticino F444 - Bticino F444 Login Instructions
- Bticino F444 - Bticino F444 User Manual
- Bticino F444 - Bticino F444 Port Forwarding Instructions
- Bticino F444 - How to change the DNS settings on a Bticino F444 router
- Bticino F444 - How to Reset the Bticino F444
- Bticino F444 - Information About the Bticino F444 Router
- Bticino F444 - Bticino F444 Screenshots