On this page I will show you the basics of how to reset the Bticino F444 router back to it's original factory defaults. It's important that you know the difference between a reset and a reboot. A reboot is referring to a cycle in the power to the router. This a lot of times will solve minor problems you may be having with your router. A reset takes all the settings and returns every one of them back to factory defaults.
Warning: Please make sure you really want to reset this router before you continue. A router reset requires you to reconfigure the router afterwards. Please consider the following before continuing:
- If you use a DSL router you have to re-enter the ISP username and password in order to continue using the Internet. If you want to know more you have to call your local Internet Service Provider.
- The router setup username and password are reverted to factory settings.
- All other settings you have changed in the past are erased. Make a list of these settings so you can go back and reconfigure them after the reset process is complete.
Other Bticino F444 Guides
This is the reset router guide for the Bticino F444. We also have the following guides for the same router:
- Bticino F444 - How to change the IP Address on a Bticino F444 router
- Bticino F444 - Bticino F444 Login Instructions
- Bticino F444 - Bticino F444 User Manual
- Bticino F444 - Bticino F444 Port Forwarding Instructions
- Bticino F444 - How to change the DNS settings on a Bticino F444 router
- Bticino F444 - Information About the Bticino F444 Router
- Bticino F444 - Bticino F444 Screenshots
Reset the Bticino F444
After you have decided you want to reset this router you need to know where the reset button is located. Typically the reset button is found on the side or back panel of the device. See the image below for where a typical reset button is located.
Take the tip of a very sharp pencil or pen and press on the reset button for a minimum of 10 seconds. Make sure to hold this button down for the entire amount of time. If you don't you may only reboot the router instead or resetting it like you wanted.
Remember this reset is going to erase every setting you have ever done to your router. We recommend trying other methods of troubleshooting if you want to try and avoid re-configuring the router.
Login to the Bticino F444
Once the reset process is a success you need to login using the default IP address, username, and password. We have found this information for you and have included it in our Login Guide for the Bticino F444 router.
Change Your Password
After you have finished logging into the router's interface you should change the default password you just used. If you need ideas or just a refresher on changing passwords check out our Choosing a Strong Password guide.
Tip: It's important that you don't lose this password. If this router is located in your home it's okay to write it down on a sticky-note and attach it to the bottom of the router for future reference.
Bticino F444 Help
Be sure to check out our other Bticino F444 info that you might be interested in.
This is the reset router guide for the Bticino F444. We also have the following guides for the same router:
- Bticino F444 - How to change the IP Address on a Bticino F444 router
- Bticino F444 - Bticino F444 Login Instructions
- Bticino F444 - Bticino F444 User Manual
- Bticino F444 - Bticino F444 Port Forwarding Instructions
- Bticino F444 - How to change the DNS settings on a Bticino F444 router
- Bticino F444 - Information About the Bticino F444 Router
- Bticino F444 - Bticino F444 Screenshots