How to change the IP Address on a Conceptronic C54BRS4 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Conceptronic C54BRS4 router.

Other Conceptronic C54BRS4 Guides

This is the ip address guide for the Conceptronic C54BRS4. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Conceptronic C54BRS4

To get started configuring the Conceptronic C54BRS4 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Conceptronic C54BRS4, follow our Conceptronic C54BRS4 Login Guide.

Change the LAN IP Address on a Conceptronic C54BRS4

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Conceptronic C54BRS4 router.

After logging into the Conceptronic C54BRS4 you see the General Setup page. To change your IP Address, the address you see from inside your network, click the the bullet on the left labeled LAN.

Configure the LAN section of your Conceptronic C54BRS4

router setup
This is the setup page from your Conceptronic C54BRS4 router.

Once on the LAN Settings page, find the box labeled IP Address and enter the new address you have chosen for your Router. We would like to recommend using the address of 192.168.1.1

Make sure that the DHCP Server remains enabled, this allows your Router to choose these automatically. The Subnet Mask should also be left at 255.255.255.0

When you are finished make sure to click the button on the bottom labeled Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Conceptronic C54BRS4 Info

Don't forget about our other Conceptronic C54BRS4 info that you might be interested in.

This is the ip address guide for the Conceptronic C54BRS4. We also have the following guides for the same router: