Setup Router logo in white Setup router name logo in white
Get Software

Creative Network Blaster CW2202-5 Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Creative Network Blaster CW2202-5 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Creative Network Blaster CW2202-5 Guides

This is the port forwarding guide for the Creative Network Blaster CW2202-5. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Creative Network Blaster CW2202-5 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Creative Network Blaster CW2202-5

To get started forwarding a port you need to login to your Creative Network Blaster CW2202-5 router. If you are already logged in you can skip this step.

To login to the Creative Network Blaster CW2202-5, follow our Creative Network Blaster CW2202-5 Login Guide.

Forward a Port on the Creative Network Blaster CW2202-5 router

Find The Port Forwarding Section of the Creative Network Blaster CW2202-5

router status mac address internet IP
This is the status page from your Creative Network Blaster CW2202-5 router.

You start on the System page of the Creative Network-Blaster-CW2202-5 router. To forward a port, click the option in the left sidebar labeled Forwarding.

Configure the Port Forwarding section of your Creative Network Blaster CW2202-5

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Creative Network Blaster CW2202-5 router.

If you are forwarding ports using the TCP protocol, you need to use the TCP Port Forwarding section. If you are forwarding ports using the UDP protocol, then use the UDP Port Forwarding section down farther on this page.

To forward a single port, enter that one port number in four separate boxes. Enter it in the WAN Start, the WAN End, the LAN Start, and the LAN End boxes.

To forward a range of ports, enter the lowest number on the range in the WAN Start, and the LAN Start boxes. Enter the highest number of the range in the WAN End, and the LAN End boxes.

Next, enter the specific LAN IP address of the computer you are forwarding these ports to.

Finally, click the Apply button.

That's all there is to it!

Test if Your Ports are Open

Now that you have forwarded ports on the Creative Network Blaster CW2202-5 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Creative Network Blaster CW2202-5 Info

Don't forget about our other Creative Network Blaster CW2202-5 info that you might be interested in.

This is the port forwarding guide for the Creative Network Blaster CW2202-5. We also have the following guides for the same router: