Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Creative Network Blaster CW2202-5

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page we show you how to reset the Creative Network-Blaster-CW2202-5 router. This is not the same as a reboot. When you reboot a router you cycle the power to the device this helps solve minor behavioral problems you might be having with your device. A router reset takes all the settings and returns them to factory defaults.

Warning: Make sure you understand what settings are changed here. Problems happen when you don't fully understand what this reset process does. Please consider the following before you continue.

  • The router's main username and password are reverted to factory defaults.
  • The Internet username and password are also reverted to factory default settings.
  • If you own a DSL router you need to re-enter the ISP username and password. This information can be gathered by calling your Internet Service Provider.
  • Any other changes that you have made to your router are erased and returned to factory defaults.

Other Creative Network Blaster CW2202-5 Guides

This is the reset router guide for the Creative Network Blaster CW2202-5. We also have the following guides for the same router:

Reset the Creative Network Blaster CW2202-5

First of all you need to know where the reset button is located. This button can be found on the back panel of the Creative Network-Blaster-CW2202-5 router. Take a look at the image below.

router reset factory settings
This is the reset page from your Creative Network Blaster CW2202-5 router.

Due to the small and recessed nature of this button you need to use the end of an unfolded paperclip or pin to press and hold down the reset button for about 10 seconds to start the reset process. If you don't hold this button down for long enough you will only be rebooting the router instead of resetting it like you initially wanted.

Remember this erases every setting you have ever changed on your device. If you want to avoid having to setup your router again you need to exhaust your other troubleshooting options first.

Login to the Creative Network Blaster CW2202-5

You've reset the Creative Network-Blaster-CW2202-5 router and now you need to log into it. This is done using the default username and password. We have these listed for you in our Login Guide.

Tip: If the defaults aren't logging you in it may be because the reset button was not held down for long enough.

Change Your Password

Once you've logged in it's a good idea to change the default password. This can be anything you like, but a strong password can be difficult to come up with. For help check out our Choosing a Strong Password Guide.

Tip: So you don't lose your new password we suggest writing it on a sticky note and attaching it to the bottom of the router.

Setup WiFi on the Creative Network-Blaster-CW2202-5

Now let's take a look at the WiFi settings. These are the SSID or network name, the Internet password, and the security method. For the strongest network we recommend using WPA2 with a strong password. For further instructions on how to do this check out our page labeled How to Setup WiFi on the Creative Network-Blaster-CW2202-5.

Creative Network Blaster CW2202-5 Help

Be sure to check out our other Creative Network Blaster CW2202-5 info that you might be interested in.

This is the reset router guide for the Creative Network Blaster CW2202-5. We also have the following guides for the same router: