How to Reset the Dlink DI-704UP

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 2 minutes

This page shows you how to properly reset the Dlink DI-704UP router back to factory default settings. A reset is not the same thing as a reboot. When I use the word reboot I am referring to a cycle in the power to the device. When I use the word reset I am referring to a complete factory restore of all settings. This means every setting you have changed in the past is erased and put back to factory defaults.

Warning: Resetting this router can cause problems for you if you are unaware of what settings are changed and what ones are not. Consider the following:

  • The router's main username and password are reverted to how they were when you got it from the factory.
  • Have you made any other changes to your device? If so, write them down so you can reconfigure them later.

Other Dlink DI-704UP Guides

This is the reset router guide for the Dlink DI-704UP. We also have the following guides for the same router:

Reset the Dlink DI-704UP

Turn your router over so you are looking at the back of it. The reset button should be located here. Take a look at the image below. The reset button has been circled for your reference.

router reset factory settings
This is the reset page from your Dlink DI-704UP router.

Take the end of a paperclip and press down on the reset button for at least 10 seconds. This begins the reset process. If you don't hold this button down for the entire amount of time you end up only rebooting the device instead of resetting it like you wanted.

Remember this reset is erasing all personal changes you have made to this Dlink DI-704UP router. To avoid this loss we recommend exhausting your other methods of troubleshooting first.

Login to the Dlink DI-704UP

Now that you've reset the Dlink DI-704UP router you'll need to log into it. This is done by using the factory default username and password provided to you in our Login Guide.

Tip: Defaults not working for you? Try holding the reset button for longer.

Change Your Password

Once you've logged into your router you should set a new password. Keep in mind that this password protects your router settings. For help in doing so visit our Choosing a Strong Password Guide.

Tip: Afraid you'll lose your new password? Try writing it on a sticky note and attaching it to the underside of your router.

Dlink DI-704UP Help

Be sure to check out our other Dlink DI-704UP info that you might be interested in.

This is the reset router guide for the Dlink DI-704UP. We also have the following guides for the same router: