How to Reset the Dlink DSL-2750B Verizon

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you been trying to login to the Dlink DSL-2750B Verizon router without success? It might be time to consider a reset. A reset is different than a reboot. When you reboot a router you cycle the power to the device. No settings are changed during a reboot. When you reset a router you take all the settings you have changed in the past and erase them reverting them all to how they were from the factory.

Warning: Resetting the router is a big step and should not be taken lightly. I strongly recommend making a list of all the possible settings that you have changed in the past. These settings could include:

Other Dlink DSL-2750B Verizon Guides

This is the reset router guide for the Dlink DSL-2750B Verizon.We also have the following guides for the same router:

Reset the Dlink DSL-2750B Verizon

Below I have an image of the Dlink DSL-2750B Verizon router's back panel. The reset button is more of a tiny pinhole. I have circled it for you in red.

router reset factory settings
This is the reset page from your Dlink router.

While the router is on take a straightened paperclip and press down on the reset button for about 10 seconds. This begins the reset process which can take several minutes to complete. If you don't hold the reset button down for long enough you might end up only rebooting the router instead of resetting it like you wanted so be careful.

Warning: Do not unplug or turn off the router during the reset process. Doing so could cause permanent damage to the device.

Remember a reset like this one is going to erase every single setting you have ever changed in the lifetime of this device. Please consider other troubleshooting methods before you decide to reset.

Login to the Dlink DSL-2750B Verizon

Now that the router reset is complete you will need to login using the default IP address, password, and username. This information can be found in our Login Guide for the Dlink DSL-2750B Verizon router, be sure to check it out.

Tip: Defaults not working? You might have not held down the reset button for long enough during the router reset. Try resetting it again, but this time hold down the button for a little longer.

Change Your Password

The next step after logging into your router is to change the password from the default. Try to make your password 14-20 characters long, unique, and contain no personal information. For additional help on this important step, see our Choosing a Strong Password guide.

Tip: To avoid losing your password, try writing it down on some paper and attaching it to the base of the router.

Setup WiFi on the Dlink DSL-2750B Verizon

Finally it is time to reconfigure the router back to how you like it. This could include many different settings. Refer to the list you made before you reset the Dlink DSL-2750B Verizon router. If you need help we have a lot of different guides for you. I recommend following our Dlink DSL-2750B Verizon WiFi Instructions to help secure your network.

Dlink DSL-2750B Verizon Help

Be sure to check out our other Dlink DSL-2750B Verizon info that you might be interested in.

This is the reset router guide for the Dlink DSL-2750B Verizon.We also have the following guides for the same router: