How to change the IP Address on a Dlink DWL-7000AP router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Dlink DWL-7000AP router.

Other Dlink DWL-7000AP Guides

This is the ip address guide for the Dlink DWL-7000AP. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink DWL-7000AP

To get started configuring the Dlink DWL-7000AP LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink DWL-7000AP, follow our Dlink DWL-7000AP Login Guide.

Change the LAN IP Address on a Dlink DWL-7000AP

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Dlink DWL-7000AP router.

After you've finished logging into the Dlink DWL-7000AP you should begin on the Home page. First, click the box on the left labeled LAN.

Configure the LAN section of your Dlink DWL-7000AP

router setup
This is the setup page from your Dlink DWL-7000AP router.

Second, find the box labeled IP Address and enter the new address you have picked out for your Router. We strongly suggest the use of 192.168.0.1 as your new IP Address.

Don't change the Subnet Mask, it should almost always remain at 255.255.255.0

When you are finished making changes to your Router, click Apply near the bottom.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink DWL-7000AP Info

Don't forget about our other Dlink DWL-7000AP info that you might be interested in.

This is the ip address guide for the Dlink DWL-7000AP. We also have the following guides for the same router: