Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Dlink RangeBooster DIR-628 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Dlink RangeBooster DIR-628 router.

Other Dlink RangeBooster DIR-628 Guides

This is the ip address guide for the Dlink RangeBooster DIR-628. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink RangeBooster DIR-628

To get started configuring the Dlink RangeBooster DIR-628 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink RangeBooster DIR-628, follow our Dlink RangeBooster DIR-628 Login Guide.

Change the LAN IP Address on a Dlink RangeBooster DIR-628

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Dlink RangeBooster DIR-628 router.

Once you have logged into the Dlink DIR-628 you begin on the Setup page. To change your Router IP Address, the local address you are looking at while inside your network, click the box on the left, in blue, labeled Network Settings.

Configure the LAN section of your Dlink RangeBooster DIR-628

router setup
This is the setup page from your Dlink RangeBooster DIR-628 router.

Next, scroll down the page until you come to the box labeled Router IP Address, it is under the heading of Router Settings. Enter the new address you have chosen for your Router here. We recommend using the address 192.168.0.1 as your local address.

Please don't change the Subnet Mask, this needs to stay at 255.255.255.0, and the DHCP Server should remain enabled.

When you are finished making changes, click the box near the top labeled Save Settings.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink RangeBooster DIR-628 Info

Don't forget about our other Dlink RangeBooster DIR-628 info that you might be interested in.

This is the ip address guide for the Dlink RangeBooster DIR-628. We also have the following guides for the same router: