Dlink WBR-2310 Wireless Settings

This is the Wireless Settings screen from the Dlink WBR-2310 router.



Keywords on The Dlink WBR-2310 Wireless Settings Screenshot

The following words were detected on the Dlink WBR-2310 Wireless Settings screenshot.

D-LINK SYSTEMS INC WIRELESS ROUTER SETUP Product Page WBR-2310 Hardware Version A1 nbsp Firmware Version 1 04 Setup Advanced Tools Status Support Internet Wireless Settings Network Settings Wireless Network Use this section to configure the wireless settings for your D-Link Router Please note that changes made on this section may also need to be duplicated on your Wireless Client To protect your privacy you can configure wireless security features This device supports three wireless security modes including WEP or WPA-Personal Wireless Network Settings Enable Wireless nbsp Wireless Network Name nbsp nbsp Also called the SSID Wireless Channel nbsp 1 2 3 4 5 6 7 8 9 10 11 Enable Auto Channel Scan nbsp Super G Mode nbsp Disabled Super G without Turbo Super G with Dynamic Turbo Enable Extended Range Mode nbsp 802 11g Only Mode nbsp Enable Hidden Wireless nbsp Also called the SSID Broadcast Wireless Security Mode Security Mode nbsp Disable Wireless Security not recommended Enable WEP Wireless Security basic Enable WPA Wireless Security enhanced Enable WPA2 Wireless Security enhanced Enable WPA2-Auto Wireless Security enhanced WEP WEP is the wireless encryption standard To use it you must enter the same key s into the router and the wireless stations For 64 bit keys you must enter 10 hex digits into each key box For 128 bit keys you must enter 26 hex digits into each key box A hex digit is either a number from 0 to 9 or a letter from A to F For the most secure use of WEP set the authentication type to Shared Key when WEP is enabled You may also enter any text string into a WEP key box in which case it will be converted into a hexadecimal key using the ASCII values of the characters A maximum of 5 text characters can be entered for 64 bit keys and a maximum of 13 characters for 128 bit keys Authentication nbsp Open Shared Key WEP Encryption nbsp 64Bit 128Bit Key Type nbsp HEX ASCII Default WEP Key nbsp WEP Key 1 WEP Key 2 WEP Key 3 WEP Key 4 WEP Key 1 nbsp nbsp WEP Key 2 nbsp nbsp WEP Key 3 nbsp nbsp WEP Key 4 nbsp nbsp WPA WPA requires stations to use high grade encryption and authentication WPA2 WPA2 requires stations to use high grade encryption and authentication WPA2-auto WPA2-Auto requires stations to use high grade encryption and authentication Cipher Type nbsp TKIP AES AUTO Personal Enterprise nbsp Personal Enterprise Passphrase nbsp Confirmed Passphrase nbsp 802 1X nbsp RADIUS Server 1 nbsp IP nbsp nbsp nbsp Port nbsp nbsp nbsp Shared Secret nbsp RADIUS Server 2 nbsp IP nbsp nbsp nbsp Port nbsp nbsp nbsp Shared Secret nbsp Helpful Hints Wireless Netowrk Name Changing your Wireless Network Name is the first step in securing your wireless network We recommend that you change it to a familiar name that does not contain any personal information Auto Channel If you are not utilizing Super G with Dynamic Turbo for it s speed improvements we recommend that you Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on Hidden Wireless Enabling Hidden Mode is another way to secure your network With this option enabled no wireless clients will be able to see your wireless network when they perform scan to see what s available In order for your wireless devices to connect to your router you will need to manually enter the Wireless Network Name on each device Securty Keys If you have enabled Wireless Security make sure you write down WEP Key or Passphrase that you have configured You will need to enter this information on any wireless device that you connect to your wireless network nbsp nbsp nbsp nbsp Copyright 2004-2005 D-Link Systems Inc