How to Reset the Edimax BR-6208AC

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you been trying to login to the Edimax BR-6208AC router unsuccessfully? It might be time to reset the Edimax BR-6208AC router back to factory defaults. This is not the same thing as a reboot.

When you reboot a router you are simply cycling the power to the unit.No settings are changed.

When you reset a router you restore the router back to factory default settings. This means every single setting you have ever changed is reverted back to factory defaults.

Warning: A reset is a big step and should not be taken lightly. Some of the settings you need to consider are:

The router's main username and password are erased and reverted back to how they were from the factory.

If this is a DSL router you will need to re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.

The wireless information such as SSID and Internet password are erased.

Any additional settings such as port forwards or IP address changes are erased.

Other Edimax BR-6208AC Guides

This is the reset router guide for the Edimax BR-6208AC. We also have the following guides for the same router:

Reset the Edimax BR-6208AC

Looking at the image below you can see the reset button is found on the back panel. It is also coupled with the WPS button. What is WPS?

router reset factory settings
This is the reset page from your Edimax BR-6208AC router.

While the router is on, press the reset button for at least 10 seconds or until the power LED button begins to flash. If you don't hold this button down for at least 10 seconds you initiate the WPS instead of resetting it like you wanted.

Remember a reset is erasing every single setting you have ever changed in the history of this device. We strongly recommend trying other troubleshooting techniques before you continue with this reset.

Login to the Edimax BR-6208AC

After the reset is complete you can login to the Edimax BR-6208AC router using the default router information. We have it for you in our Edimax BR-6208AC Login Guide.

Tip: If the default router settings didn't work it's possible you didn't hold the reset button down for long enough.

Change Your Password

Once you have logged into the Edimax BR-6208AC router you need to change the router's default password. This password protects your router settings. Follow our Choosing a Strong Password guide for helpful tips and ideas.

Tip: To avoid losing this password try writing it down on a slip of paper and attach it to the bottom of the router.

Setup WiFi on the Edimax BR-6208AC

Finally it's time to begin the reconfiguration of the Edimax BR-6208AC router. This must include the WiFi settings. For a great guide on the topic check out our Edimax BR-6208AC WiFi Instructions.

Edimax BR-6208AC Help

Be sure to check out our other Edimax BR-6208AC info that you might be interested in.

This is the reset router guide for the Edimax BR-6208AC. We also have the following guides for the same router: