How to Reset the Edimax BR6228nS

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

You need to reset the Edimax BR6228nS router if you have tried to access your router interface and can't do it. On this page I will show you how to properly reset the Edimax BR6228nS router.

There is a lot of understandable confusion between the terms reset and reboot. What is the difference>?

  • Reboot - A reboot is a cycle in the power to the unit. There is no change of settings. A reboot is simply a restart of the device.
  • Reset - A reset is a complete factory restore of all settings. This means if you have made any changes (such as your router access password) it erases that and returns it to the original default router password it came with from the factory.

Warning: We strongly recommend you try other methods of troubleshooting your router access problem before deciding to reset the device. If you still set on resetting the Edimax BR6228nS router, you should make a list of any settings you may of changed during the lifetime of this device. Things to consider are:

  • The router access IP address, username and password
  • The Internet information such as SSID/name and password
  • If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Call your ISP for these details.
  • Port forwards, IP address changes, parental controls, DNS server...etc.

Other Edimax BR6228nS Guides

This is the reset router guide for the Edimax BR6228nS. We also have the following guides for the same router:

Reset the Edimax BR6228nS

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

To find the reset button you need to turn the router around so you are looking at the back panel. This button should be located on the right side of the device. Take a look at the image below.

router reset factory settings
This is the reset page from your Edimax BR6228nS router.

While the router is on press and hold the reset button for about 10 seconds. This begins the reset process. If you don't hold the reset button down for the entire amount of time you end up initiating the WPS function. What is WPS?

Remember this reset is erasing every setting you have ever changed. Please consider other troubleshooting options before you decide to reset the Edimax BR6228nS.

Login to the Edimax BR6228nS

After you've reset the Edimax BR6228nS router you'll need to log into it. This is done by using the factory default username and password. This can be found in our Login Guide.

Tip: Defaults not logging you in? It could be because the reset button wasn't held down for long enough.

Change Your Password

Now that you've successfully reset and logged into your router we suggest setting a new password for it. This can be anything you want it to be, however keep in mind that a strong password is 14-20 characters in length and includes no personal information. For more help be sure to visit our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on a note and attaching it to the bottom of your router.

Setup WiFi on the Edimax BR6228nS

It is time to begin the reconfiguration process. Don't forget to include the WiFi settings. For an easy to follow guide on this topic check out our How to Setup WiFi on the Edimax BR6228nS page.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Edimax BR6228nS Help

Be sure to check out our other Edimax BR6228nS info that you might be interested in.

This is the reset router guide for the Edimax BR6228nS. We also have the following guides for the same router: