Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the EnGenius ESR9350

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

If you have tried to login to the EnGenius ETR9350 router and are unable to do so you may need to reset the EnGenius ETR9350 router back to factory defaults.

A reset is not the same thing as a reboot. When I use the word reboot I am referring to a cycle in the power to the unit. When I use the word reset I am referring to a complete factory restore of all settings.

Warning: Resetting this router is a big step. Every single setting you have ever changed is going to be erased. Make a list of any settings you may of changed in the past such as:

  • The router's main username and password.
  • The WiFi information such as network name and password.
  • If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Make sure to call your local ISP for the details.
  • Have you ever made any other changes to this device? How about port forwards or IP addresses?

Other EnGenius ESR9350 Guides

This is the reset router guide for the EnGenius ESR9350. We also have the following guides for the same router:

Reset the EnGenius ESR9350

I was unable to find an image of the reset button for the EnGenius ETR9350 router. Below is an image of a different Engenius router back panel. The reset button should be in a similar spot.

router reset factory settings
This is the reset page from your EnGenius ESR9350 router.

With the EnGenius ETR9350 router turned on, take a straightened paperclip and press down on the reset button for about 10 seconds to begin the reset process. If you don't hold the reset button/pinhole down for a long enough amount of time you might end up only rebooting the device instead of resetting it like you intended.

Remember a reset like the one you are performing here is going to erase every single setting you have ever changed. Please consider other troubleshooting options before you start this reset.

Login to the EnGenius ESR9350

Following that you'll need to log into your EnGenius ETR9350 router. This is done by using the factory default username and password listed for your use in our Login Guide.

Tip: Defaults not working for you? It could be because the reset button wasn't held down for long enough.

Change Your Password

Once you've logged into your router we suggest setting a new password for it. Keep in mind that this password won't protect your wireless network, just your router settings. Still, setting a strong password is always a good decision. For help in doing so be sure to visit our Choosing a Strong Password Guide.

Tip: Prevent yourself from losing your new password by writing it on a sticky note and attaching it to the bottom of your router.

Setup WiFi on the EnGenius ETR9350

You should now begin the reconfiguration process of the EnGenius ETR9350 router. Don't forget to reconfigure the WiFi settings as well. We have a great step-by-step guide for you if you are interested. It is titled How to Setup WiFi on the EnGenius ETR9350.

EnGenius ESR9350 Help

Be sure to check out our other EnGenius ESR9350 info that you might be interested in.

This is the reset router guide for the EnGenius ESR9350. We also have the following guides for the same router: