Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Huawei E5172s-920

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you been trying to login to the Huawei E5172s-920 router unsuccessfully? It may be time to consider a reset. A reset is not the same thing as a reboot. A reboot is a simple cycle in the power to the unit. A reset is where you take all the settings and return them all to factory defaults.

Warning: Resetting a router is a big step and should be considered thoroughly before you continue. You need to consider the following before you continue:

  • The router's main username and password is erased and returned to factory defaults.
  • The WiFi information such as SSID and Internet password are also erased and returned to factory defaults.
  • If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. You need to call your ISP for these details.
  • Have you ever forwarded a port or changed an IP address? These need to be reconfigured after the reset is finished as well.

Other Huawei E5172s-920 Guides

This is the reset router guide for the Huawei E5172s-920. We also have the following guides for the same router:

Reset the Huawei E5172s-920

Below is an image of the Huawei E5172s-920 router. I have circled the reset button for you. Now find it on the router you are resetting.

router reset factory settings
This is the reset page from your Huawei E5172s-920 router.

First, make sure the router is on. Then take a straightened paperclip and press down on the reset button for about 10 seconds. This begins the reset process. If you don't hold this button down for the entire amount of time you might end up only rebooting the router instead of resetting it

Remember a reset will erase every setting you have ever changed. We strongly recommend trying other troubleshooting methods before you decide to reset.

Login to the Huawei E5172s-920

Following that you'll need to log into your Huawei E5172s-920 router. This is accomplished by using the factory default username and password. Don't know where to get these? We have them listed for your use in our Login Guide.

Tip: If the defaults aren't working for you it could be because the reset button wasn't held down for long enough.

Change Your Password

Once you've reset and logged into your router you'll want to set a new password for it. Bear in mind that this password will only protect your router settings, not your wireless network. All the same, setting a strong password is always a good idea. For help in doing so be sure to take a look through our Choosing a Strong Password Guide.

Tip: Keep from losing your new password by writing it on a note and attaching it to the bottom of your router.

Setup WiFi on the Huawei E5172s-920

Now it's time to reconfigure the Huawei E5172s-920 router. You need to reconfigure the WiFi as well. A great guide for you to follow if you need it is our Huawei E5172s-920 WiFi Instructions page.

Huawei E5172s-920 Help

Be sure to check out our other Huawei E5172s-920 info that you might be interested in.

This is the reset router guide for the Huawei E5172s-920. We also have the following guides for the same router: