Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Jensen Scandinavia AirLink 29150

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

On this page I will explain how to reset the Jensen-Scandinavia AirLink-29150 router. This is not the same thing as a reboot. When you reboot a router you cycle the power to the unit. When you reset a router you take all the settings and return them all to factory defaults.

Warning: This reset is a big step and should not be taken lightly. We strongly recommend trying other troubleshooting methods first. Once you have decided to reset it is time to create a list of all the possible settings you have changed in the past such as:

  • The router's main username and password.
  • The Internet name and password.
  • If this is a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. Call your local ISP for these details.
  • Write down any other settings such as port forwards or IP address changes. These need to be reconfigured after the reset is complete as well.

Other Jensen Scandinavia AirLink 29150 Guides

This is the reset router guide for the Jensen Scandinavia AirLink 29150. We also have the following guides for the same router:

Reset the Jensen Scandinavia AirLink 29150

Below is an image of the reset button on the back of the router. Note where the reset button is located.

router reset factory settings
This is the reset page from your Jensen Scandinavia AirLink 29150 router.

While the router is on, take a straightened paperclip and press down on the reset button for about 10 seconds. This starts the reset process. If you don't hold the reset button down for long enough you might end up only rebooting the router instead of resetting it like you wanted.

Warning: Do not unplug or turn off the router during the reset process. Doing so could result in permanent damage to the router.

Don't forget a reset like this one is going to erase every setting you have changed in the past. Try other methods of troubleshooting before you continue with this reset.

Login to the Jensen Scandinavia AirLink 29150

It is now time to login to the Jensen-Scandinavia AirLink-29150 router now that the reset is complete. We have all the factory settings in our Login Guide for the Jensen-Scandinavia AirLink-29150 router.

Tip: Did the defaults work? If they didn't try resetting the router again but hold the reset button down for a little longer.

Change Your Password

Once the login is successful you should change the default password. Default passwords are typically not secure and should not be kept. Change your router's password following the guidelines in our Choosing a Strong Password guide.

Tip: If you are worried about losing this password you should try writing it down on a slip of paper and attach it to the bottom of the device.

Setup WiFi on the Jensen-Scandinavia AirLink-29150

It is time to begin the reconfiguration process. This could include many different settings but it will most likely include the WiFi settings. Check out our Jensen-Scandinavia AirLink-29150 WiFi Instructions.

Jensen Scandinavia AirLink 29150 Help

Be sure to check out our other Jensen Scandinavia AirLink 29150 info that you might be interested in.

This is the reset router guide for the Jensen Scandinavia AirLink 29150. We also have the following guides for the same router: