How to Reset the Jensen Scandinavia AirLink 29150

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

On this page I will be showing you how to properly reset the Jensen Scandinavia AirLink 29150v6 router back to factory defaults. This is not the same thing as a reboot. When you reboot a router you cycle the power to the unit. When you reset the router you take all the settings you have ever changed and it returns them to factory defaults.

Warning: This means every setting you have changed in the past is erased. It's a good idea to try other troubleshooting methods. If you are continuing with this reset we suggest making a list of any settings you may of changed in the past. These include:

  • The router's main username and password.
  • The Internet name and password.
  • If this is a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. Call your local ISP for these details.
  • If you have ever forwarded a port or changed an IP address they are erased as well.

Other Jensen Scandinavia AirLink 29150 Guides

This is the reset router guide for the Jensen Scandinavia AirLink 29150 v6. We also have the following guides for the same router:

Reset the Jensen Scandinavia AirLink 29150

In the image below is the reset button for the Jensen Scandinavia AirLink 29150v6 router. As you can see it is located on the right side of the back panel.

router reset factory settings
This is the reset page from your Jensen Scandinavia AirLink 29150 router.

While the router is on take a straightened paperclip or similar object and press down on the reset button for about 10 seconds. This begins the reset process.

Warning: DO NOT unplug or turn off the Jensen Scandinavia AirLink 29150v6 router during the reset process. Doing so may result in irreversible damage to the device.

Don't forget that this reset erases every single setting you have ever changed in the past. We strongly recommend trying other troubleshooting methods before you continue with this reset.

Login to the Jensen Scandinavia AirLink 29150

After that you'll want to log into your Jensen Scandinavia AirLink 29150v6 router. This is done by using the factory default username and password. Not sure where to find these? We have them listed for your use in our Login Guide.

Tip: If the defaults aren't working for you it might be because the reset button wasn't held down for long enough.

Change Your Password

Following that you'll want to set a new password for your router. This can be anything you like, however bear in mind that a strong password is 14-20 characters in length and includes no personal information. For more help be sure to take a look through our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on a slip of paper and taping it to the bottom of your router.

Setup WiFi on the Jensen Scandinavia AirLink 29150v6

Finally it's time to begin the reconfiguration process. It is important to setup the Jensen Scandinavia AirLink 29150v6 WiFi so your network is secure. For help check out our Jensen Scandinavia AirLink 29150v6 WiFi Instructions.

Jensen Scandinavia AirLink 29150 Help

Be sure to check out our other Jensen Scandinavia AirLink 29150 info that you might be interested in.

This is the reset router guide for the Jensen Scandinavia AirLink 29150 v6. We also have the following guides for the same router: