If you need to reset your KAON Media DG2200TN router back to factory settings, then this article shows you how. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other KAON Media DG2200TN Guides
This is the reset router guide for the KAON Media DG2200TN 1.3.26.0 (NO) Telenor. We also have the following guides for the same router:
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Login to the KAON Media DG2200TN
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Information About the KAON Media DG2200TN Router
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Reset the KAON Media DG2200TN
Recover Password in KAON Media DG2200TN
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the KAON Media DG2200TN
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.
Keep in mind that this will completely reset your KAON Media DG2200TN router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the KAON Media DG2200TN
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our DG2200TN Login Guide has all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other KAON Media DG2200TN Guides
We have collected a lot of information about the KAON Media DG2200TN router. You can find some of our additional content here.
This is the reset router guide for the KAON Media DG2200TN 1.3.26.0 (NO) Telenor. We also have the following guides for the same router:
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Login to the KAON Media DG2200TN
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Information About the KAON Media DG2200TN Router
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Reset the KAON Media DG2200TN