This article covers how to reset the KAON Media DG2200TN router back to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other KAON Media DG2200TN Guides
This is the reset router guide for the KAON Media DG2200TN 01.01.12 (DA) Telenor. We also have the following guides for the same router:
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Login to the KAON Media DG2200TN
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Information About the KAON Media DG2200TN Router
Recover Password in KAON Media DG2200TN
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the KAON Media DG2200TN
You can usually find a small reset button on either the back or the bottom of a router. This is what a typical reset button looks like:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Keep in mind that this will completely reset your KAON Media DG2200TN router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the KAON Media DG2200TN
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a DG2200TN Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other KAON Media DG2200TN Guides
If you want additional help with your KAON Media DG2200TN be sure to check out some of our other guides.
This is the reset router guide for the KAON Media DG2200TN 01.01.12 (DA) Telenor. We also have the following guides for the same router:
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Login to the KAON Media DG2200TN
- KAON Media DG2200TN 01.01.12 (DA) Telenor - Information About the KAON Media DG2200TN Router