Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Netcomm 3G9WB router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Netcomm 3G9WB router.

Other Netcomm 3G9WB Guides

This is the ip address guide for the Netcomm 3G9WB. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netcomm 3G9WB

To get started configuring the Netcomm 3G9WB LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netcomm 3G9WB, follow our Netcomm 3G9WB Login Guide.

Change the LAN IP Address on a Netcomm 3G9WB

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netcomm 3G9WB router.

To change your IP Address you need to first log into the NetComm 3G9WB, this places you on the Summary page. Next, click the button labeled Advanced Settings to open the drop down menu. Click the first choice, labeled LAN.

Configure the LAN section of your Netcomm 3G9WB

router setup
This is the setup page from your Netcomm 3G9WB router.

You should now be on the Advanced Settings > Local Area Network (LAN) page. This page allows you to change your IP Address, the address you see while inside your network. Place your cursor in the box labeled IP Address and enter the new address you have chosen for your Router. One good choice would be 192.168.0.1

Make sure, that while you may change your IP Address, you should not change the Subnet Mask, which needs to remain at 255.255.255.0

Once you have finished making these changes, you will need to save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netcomm 3G9WB Info

Don't forget about our other Netcomm 3G9WB info that you might be interested in.

This is the ip address guide for the Netcomm 3G9WB. We also have the following guides for the same router: