Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netcomm 3G9WB

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Netcomm 3G9WB router back to factory default settings. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's username and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netcomm 3G9WB Guides

This is the reset router guide for the Netcomm 3G9WB. We also have the following guides for the same router:

Recover Password in Netcomm 3G9WB

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netcomm 3G9WB

Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Don't forget, this step will totally reset your Netcomm 3G9WB router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netcomm 3G9WB

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our 3G9WB Login Guide to find all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netcomm 3G9WB Guides

We have collected a lot of information about the Netcomm 3G9WB router. You can find some of our additional content here.

This is the reset router guide for the Netcomm 3G9WB. We also have the following guides for the same router: