Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear D6200

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Netgear D6200 router. A router reset is very different than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's username and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear D6200 Guides

This is the reset router guide for the Netgear D6200 v1.1.00.36_1.00.36. We also have the following guides for the same router:

Recover Password in Netgear D6200

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Netgear D6200

Most routers have a small button on either the back or the bottom. This is what a typical reset button looks like:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will totally reset your Netgear D6200 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear D6200

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the D6200 Login Guide to find everything that you need to log in.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Netgear D6200 Guides

This isn't our only Netgear D6200 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear D6200 v1.1.00.36_1.00.36. We also have the following guides for the same router: