This guide shows you how to reset your Netgear Nighthawk R7900P router. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's username and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Netgear Nighthawk R7900P Guides
This is the reset router guide for the Netgear Nighthawk R7900P v1.4.1.30_1.2.26. We also have the following guides for the same router:
Recover Password in Netgear Nighthawk R7900P
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Netgear Nighthawk R7900P
Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.
Just don't forget that this will totally reset your Netgear Nighthawk R7900P router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear Nighthawk R7900P
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our Nighthawk R7900P Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Netgear Nighthawk R7900P Guides
This isn't our only Netgear Nighthawk R7900P guide. We also have the following guides for this router.
This is the reset router guide for the Netgear Nighthawk R7900P v1.4.1.30_1.2.26. We also have the following guides for the same router: