Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear VersaLink-B90-75025-15

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Netgear VersaLink-B90-75025-15 router to factory default settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear VersaLink-B90-75025-15 Guides

This is the reset router guide for the Netgear VersaLink-B90-75025-15. We also have the following guides for the same router:

Recover Password in Netgear VersaLink-B90-75025-15

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Netgear VersaLink-B90-75025-15

Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will erase everything you have previously done to this Netgear VersaLink-B90-75025-15 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear VersaLink-B90-75025-15

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our VersaLink-B90-75025-15 Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Netgear VersaLink-B90-75025-15 Guides

This isn't our only Netgear VersaLink-B90-75025-15 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear VersaLink-B90-75025-15. We also have the following guides for the same router: