Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear VMDG485

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your Netgear VMDG485 router. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.

Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:

  • The router's login credentials are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear VMDG485 Guides

This is the reset router guide for the Netgear VMDG485 Virgin Media. We also have the following guides for the same router:

Recover Password in Netgear VMDG485

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Netgear VMDG485

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Netgear VMDG485 router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear VMDG485

After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our VMDG485 Login Guide to find all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Netgear VMDG485 Guides

Here are some of our other Netgear VMDG485 guides that you might be interested in.

This is the reset router guide for the Netgear VMDG485 Virgin Media. We also have the following guides for the same router: