Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Netgear WNR3500 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Netgear WNR3500 router.

Other Netgear WNR3500 Guides

This is the ip address guide for the Netgear WNR3500. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netgear WNR3500

To get started configuring the Netgear WNR3500 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear WNR3500, follow our Netgear WNR3500 Login Guide.

Change the LAN IP Address on a Netgear WNR3500

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netgear WNR3500 router.

After you have finished logging into the Netgear WNR3500 you should begin on the Basic Settings page. First, scroll down the dark blue side bar on the left until you see the choice of LAN Setup, click this choice.

Configure the LAN section of your Netgear WNR3500

router setup
This is the setup page from your Netgear WNR3500 router.

On this new page, place your cursor in the first box labeled IP Address. Type in the new address you want to use for your Router. We recommend using the address you see in this screenshot, 192.168.1.1

Once you have made this change to your Router, make sure to leave the IP Subnet Mask at 255.255.255.0

Finally, click the Apply button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netgear WNR3500 Info

Don't forget about our other Netgear WNR3500 info that you might be interested in.

This is the ip address guide for the Netgear WNR3500. We also have the following guides for the same router: