Setup Router logo in white Setup router name logo in white
Get Software

Reset the NetMaster CBW-560

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the NetMaster CBW-560 router. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's login credentials are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other NetMaster CBW-560 Guides

This is the reset router guide for the NetMaster CBW-560. We also have the following guides for the same router:

Recover Password in NetMaster CBW-560

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the NetMaster CBW-560

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.

Don't forget, this step will totally reset your NetMaster CBW-560 router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the NetMaster CBW-560

Now you need to log in using the factory default username and password. Just follow our CBW-560 Login Guide to find all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other NetMaster CBW-560 Guides

This isn't our only NetMaster CBW-560 guide. We also have the following guides for this router.

This is the reset router guide for the NetMaster CBW-560. We also have the following guides for the same router: