How to change the IP Address on a Pace Plc 4111N-030 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Pace Plc 4111N-030 router.

Other Pace Plc 4111N-030 Guides

This is the ip address guide for the Pace Plc 4111N-030. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Pace Plc 4111N-030

To get started configuring the Pace Plc 4111N-030 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Pace Plc 4111N-030, follow our Pace Plc 4111N-030 Login Guide.

Change the LAN IP Address on a Pace Plc 4111N-030

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Pace Plc 4111N-030 router.

When you have logged into the Pace-Plc 4111N-030 you are taken to the Home page of this Router. To change your LAN IP Address, the address you see while inside your local network, click the choice at the top of the page labeled Settings. Next, under this click LAN and finally DHCP.

Configure the LAN section of your Pace Plc 4111N-030

router setup
This is the setup page from your Pace Plc 4111N-030 router.

On this new page, under the heading of DHCP Network Range you may either choose one of the preselected choices or click Configure manually. If you choose Configure manually make sure that the address you enter in the Router Address box is one easily remembered, such as 192.168.0.1

Don't change the Subnet Mask this needs to remain at 255.255.255.0

When you have finished, make sure to save your changes.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Pace Plc 4111N-030 Info

Don't forget about our other Pace Plc 4111N-030 info that you might be interested in.

This is the ip address guide for the Pace Plc 4111N-030. We also have the following guides for the same router: