Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 4111N-030

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Pace Plc 4111N-030 router. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's username and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Pace Plc 4111N-030 Guides

This is the reset router guide for the Pace Plc 4111N-030. We also have the following guides for the same router:

Recover Password in Pace Plc 4111N-030

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Pace Plc 4111N-030

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not worry about holding the button down too long; this is harmless.

Keep in mind that this will completely reset your Pace Plc 4111N-030 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Pace Plc 4111N-030

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our 4111N-030 Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Pace Plc 4111N-030 Guides

This isn't our only Pace Plc 4111N-030 guide. We also have the following guides for this router.

This is the reset router guide for the Pace Plc 4111N-030. We also have the following guides for the same router: