Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Ruckus 2211-EXT router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Ruckus 2211-EXT router.

Other Ruckus 2211-EXT Guides

This is the ip address guide for the Ruckus 2211-EXT. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Ruckus 2211-EXT

To get started configuring the Ruckus 2211-EXT LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Ruckus 2211-EXT, follow our Ruckus 2211-EXT Login Guide.

Change the LAN IP Address on a Ruckus 2211-EXT

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Ruckus 2211-EXT router.

Now that you have decided to change your Router IP Address, the address you see when inside your network, log into the Ruckus 2211-EXT. This should take you to the Device Status page of your Router. Next, click the choice on the left labeled System, this is under the heading of Configuration.

Configure the LAN section of your Ruckus 2211-EXT

router setup
This is the setup page from your Ruckus 2211-EXT router.

On this new page, place your cursor in the first of the four boxes labeled Local IP Address. This is where you should enter your new address you have specifically chosen for your Router. We suggest using an address such as 192.168.1.1

While making this change to your Router, please leave the Subnet Mask at 255.255.255.0

When you have finished making these changes, click the button labeled Update Settings.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Ruckus 2211-EXT Info

Don't forget about our other Ruckus 2211-EXT info that you might be interested in.

This is the ip address guide for the Ruckus 2211-EXT. We also have the following guides for the same router: