Setup Router logo in white Setup router name logo in white
Get Software

Reset the Ruckus 2211-EXT

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Ruckus 2211-EXT router to factory default settings. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's login credentials are reset.
  • All WiFi settings are reset, including network name and password.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Ruckus 2211-EXT Guides

This is the reset router guide for the Ruckus 2211-EXT. We also have the following guides for the same router:

Recover Password in Ruckus 2211-EXT

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Ruckus 2211-EXT

There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Keep in mind that this will completely reset your Ruckus 2211-EXT router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Ruckus 2211-EXT

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our 2211-EXT Login Guide.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Ruckus 2211-EXT Guides

If you want additional help with your Ruckus 2211-EXT be sure to check out some of our other guides.

This is the reset router guide for the Ruckus 2211-EXT. We also have the following guides for the same router: