How to change the IP Address on a TDS GT784WN router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the TDS GT784WN router.

Other TDS GT784WN Guides

This is the ip address guide for the TDS GT784WN. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The TDS GT784WN

To get started configuring the TDS GT784WN LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the TDS GT784WN, follow our TDS GT784WN Login Guide.

Change the LAN IP Address on a TDS GT784WN

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your TDS GT784WN router.

After you are logged into the TDS GT784WN you should see the Summary page of this Router. To change your Router IP Address, the address you can see when inside your local network, click the choice at the top, in green, labeled Advanced Setup, it is on the far right corner. Next, click LAN IP Settings, it is on the left in the side bar under the heading of IP Addressing.

Configure the LAN section of your TDS GT784WN

router setup
This is the setup page from your TDS GT784WN router.

You should now be on the page labeled LAN IP And DHCP Settings. Place your cursor in the box labeled Modem IP Address and enter the new address you have chosen for this Router. One good suggestion is the address of 192.168.1.1

Please be sure to leave the Modem Subnet Mask at 255.255.255.0

Click the green button labeled Apply and Reboot once you have finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other TDS GT784WN Info

Don't forget about our other TDS GT784WN info that you might be interested in.

This is the ip address guide for the TDS GT784WN. We also have the following guides for the same router: