This page shows how to change the LAN IP Address on the TP-Link Archer D9 router.
Other TP-Link Archer D9 Guides
This is the ip address guide for the TP-Link Archer D9 0.9.1 0.1 v0041.0. We also have the following guides for the same router:
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - TP-Link Archer D9 Login Instructions
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - TP-Link Archer D9 User Manual
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - Setup WiFi on the TP-Link Archer D9
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - TP-Link Archer D9 Screenshots
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - Information About the TP-Link Archer D9 Router
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - Reset the TP-Link Archer D9
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The TP-Link Archer D9
To get started configuring the TP-Link Archer D9 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the TP-Link Archer D9, follow our TP-Link Archer D9 Login Guide.
Change the LAN IP Address on a TP-Link Archer D9
If you followed our login guide above then you should see this screen.
Want to change your IP address? Awesome.
We'll start on the Home page of the TP-Link Archer D9 router. From there navigate to the left hand sidebar and click Network. Then click LAN Settings just beneath that.
Configure the LAN section of your TP-Link Archer D9
This brings you to the page shown above.
Now you can change your IP Address. Got an address in mind? Enter it into the given box. Not quite sure what to change it to? That's cool too. Try 10.0.0.1
Beneath that is the Subnet Mask. Don't change this. It needs to stay at it's magic number, which is 255.255.255.0
That's all there is to it. Wasn't so bad, right? Just make sure to click Save before closing the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other TP-Link Archer D9 Info
Don't forget about our other TP-Link Archer D9 info that you might be interested in.
This is the ip address guide for the TP-Link Archer D9 0.9.1 0.1 v0041.0. We also have the following guides for the same router:
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - TP-Link Archer D9 Login Instructions
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - TP-Link Archer D9 User Manual
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - Setup WiFi on the TP-Link Archer D9
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - TP-Link Archer D9 Screenshots
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - Information About the TP-Link Archer D9 Router
- TP-Link Archer D9 0.9.1 0.1 v0041.0 - Reset the TP-Link Archer D9