In this article, you will learn how to reset your ZTE F609 back to factory settings. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE F609 Guides
This is the reset router guide for the ZTE F609 v7.0.10P1T5. We also have the following guides for the same router:
- ZTE F609 v5.2.10P3T12 - Reset the ZTE F609
- ZTE F609 v5.2.10P3T12 - ZTE F609 Login Instructions
- ZTE F609 v5.2.10P3T12 - ZTE F609 Screenshots
- ZTE F609 v5.2.10P3T12 - Information About the ZTE F609 Router
Recover Password in ZTE F609
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the ZTE F609
Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Remember, this will erase everything you have previously done to this ZTE F609 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE F609
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the F609 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other ZTE F609 Guides
Here are some of our other ZTE F609 guides that you might be interested in.
This is the reset router guide for the ZTE F609 v7.0.10P1T5. We also have the following guides for the same router:
- ZTE F609 v5.2.10P3T12 - Reset the ZTE F609
- ZTE F609 v5.2.10P3T12 - ZTE F609 Login Instructions
- ZTE F609 v5.2.10P3T12 - ZTE F609 Screenshots
- ZTE F609 v5.2.10P3T12 - Information About the ZTE F609 Router