Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXHN H298N

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

If you need to reset your ZTE ZXHN H298N router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZTE ZXHN H298N Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the ZTE ZXHN H298N DIGI. We also have the following guides for the same router:

Recover Password in ZTE ZXHN H298N

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the ZTE ZXHN H298N

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. It is harmless to hold the reset button too long.

Don't forget, this step will totally reset your ZTE ZXHN H298N router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE ZXHN H298N

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the ZXHN H298N Login Guide to find everything that you need to log in.

Change Your Password

You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other ZTE ZXHN H298N Guides

Here are some of our other ZTE ZXHN H298N guides that you might be interested in.

This is the reset router guide for the ZTE ZXHN H298N DIGI. We also have the following guides for the same router: