This page shows how to change the LAN IP Address on the ZyXEL NBG-418N router.
Other ZyXEL NBG-418N Guides
This is the ip address guide for the ZyXEL NBG-418N. We also have the following guides for the same router:
- ZyXEL NBG-418N - Reset the ZyXEL NBG-418N
- ZyXEL NBG-418N - ZyXEL NBG-418N User Manual
- ZyXEL NBG-418N - ZyXEL NBG-418N Login Instructions
- ZyXEL NBG-418N - How to change the DNS settings on a ZyXEL NBG-418N router
- ZyXEL NBG-418N - Setup WiFi on the ZyXEL NBG-418N
- ZyXEL NBG-418N - Information About the ZyXEL NBG-418N Router
- ZyXEL NBG-418N - ZyXEL NBG-418N Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The ZyXEL NBG-418N
To get started configuring the ZyXEL NBG-418N LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the ZyXEL NBG-418N, follow our ZyXEL NBG-418N Login Guide.
Change the LAN IP Address on a ZyXEL NBG-418N
If you followed our login guide above then you should see this screen.
To change your LAN IP Address, the address you see when inside your local network, first log into the ZyXEL NBG-418N which places you on the Device Information page. From here click the file on the left side of the page labeled Network. This opens a new sub menu, pick the link labeled LAN.
Configure the LAN section of your ZyXEL NBG-418N
You should now be on a page labeled IP. There are two things you can change on this page. The first is the IP Address. Enter your new IP Address you have picked out for your router in this box. A couple good choices are 10.0.0.1 or 192.168.0.1
The other box is the IP Subnet Mask, we recommend that you leave this at 255.255.255.0
Click the box at the bottom of the page labeled Apply and you are finished!
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other ZyXEL NBG-418N Info
Don't forget about our other ZyXEL NBG-418N info that you might be interested in.
This is the ip address guide for the ZyXEL NBG-418N. We also have the following guides for the same router:
- ZyXEL NBG-418N - Reset the ZyXEL NBG-418N
- ZyXEL NBG-418N - ZyXEL NBG-418N User Manual
- ZyXEL NBG-418N - ZyXEL NBG-418N Login Instructions
- ZyXEL NBG-418N - How to change the DNS settings on a ZyXEL NBG-418N router
- ZyXEL NBG-418N - Setup WiFi on the ZyXEL NBG-418N
- ZyXEL NBG-418N - Information About the ZyXEL NBG-418N Router
- ZyXEL NBG-418N - ZyXEL NBG-418N Screenshots