Reset the ZyXEL P-2602HWT-F1

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your ZyXEL P-2602HWT-F1 back to factory settings. A router reset is very different than a router reboot. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi login information and network names are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZyXEL P-2602HWT-F1 Guides

This is the reset router guide for the ZyXEL P-2602HWT-F1. We also have the following guides for the same router:

Recover Password in ZyXEL P-2602HWT-F1

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the ZyXEL P-2602HWT-F1

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Just don't forget that this will totally reset your ZyXEL P-2602HWT-F1 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZyXEL P-2602HWT-F1

Now you need to log in using the factory default username and password. Our P-2602HWT-F1 Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other ZyXEL P-2602HWT-F1 Guides

Here are some of our other ZyXEL P-2602HWT-F1 guides that you might be interested in.

This is the reset router guide for the ZyXEL P-2602HWT-F1. We also have the following guides for the same router: