Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a ZyXEL VSG1432-Telus router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the ZyXEL VSG1432-Telus router.

Other ZyXEL VSG1432-Telus Guides

This is the ip address guide for the ZyXEL VSG1432-Telus. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The ZyXEL VSG1432-Telus

To get started configuring the ZyXEL VSG1432-Telus LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the ZyXEL VSG1432-Telus, follow our ZyXEL VSG1432-Telus Login Guide.

Change the LAN IP Address on a ZyXEL VSG1432-Telus

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your ZyXEL VSG1432-Telus router.

When you have finished logging into the ZyXEL VSG1432-Telus you begin on the Home page. To change your IP Address, the address you see while inside your network, click the choice labeled Network Settings, this is located in the green bar at the top of the page. Next, click LAN Setup, this is in a smaller purple bar.

Configure the LAN section of your ZyXEL VSG1432-Telus

router setup
This is the setup page from your ZyXEL VSG1432-Telus router.

You now are on the correct page. Find the heading of LAN IP Setup. Enter your new address in the box labeled IP Address. One good choice is the address of 192.168.0.1

Nothing else should be changed on this page. Simply save your changes before exiting.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other ZyXEL VSG1432-Telus Info

Don't forget about our other ZyXEL VSG1432-Telus info that you might be interested in.

This is the ip address guide for the ZyXEL VSG1432-Telus. We also have the following guides for the same router: