This page shows how to change the LAN IP Address on the Actiontec T2200H router.
Other Actiontec T2200H Guides
This is the ip address guide for the Actiontec T2200H Telus. We also have the following guides for the same router:
- Actiontec T2200H Telus - Actiontec T2200H User Manual
- Actiontec T2200H Telus - Actiontec T2200H Login Instructions
- Actiontec T2200H Telus - Actiontec T2200H Port Forwarding Instructions
- Actiontec T2200H Telus - How to change the DNS settings on a Actiontec T2200H router
- Actiontec T2200H Telus - Setup WiFi on the Actiontec T2200H
- Actiontec T2200H Telus - How to Reset the Actiontec T2200H
- Actiontec T2200H Telus - Actiontec T2200H Screenshots
- Actiontec T2200H Telus - Information About the Actiontec T2200H Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Actiontec T2200H
To get started configuring the Actiontec T2200H LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Actiontec T2200H, follow our Actiontec T2200H Login Guide.
Change the LAN IP Address on a Actiontec T2200H
If you followed our login guide above then you should see this screen.
After you've logged into the Actiontec T2200H Telus router you should be taken to the Home page. To change the Router IP Address click Advanced Setup near the top of the page. From here click LAN IP Settings.
Configure the LAN section of your Actiontec T2200H
On this page you can enter your desired Modem IP Address. One good option is 10.0.0.1
Make sure not to change the Modem Subnet Mask. This should stay at 255.255.255.0
When you're done make sure to click Apply and Reboot.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Actiontec T2200H Info
Don't forget about our other Actiontec T2200H info that you might be interested in.
This is the ip address guide for the Actiontec T2200H Telus. We also have the following guides for the same router:
- Actiontec T2200H Telus - Actiontec T2200H User Manual
- Actiontec T2200H Telus - Actiontec T2200H Login Instructions
- Actiontec T2200H Telus - Actiontec T2200H Port Forwarding Instructions
- Actiontec T2200H Telus - How to change the DNS settings on a Actiontec T2200H router
- Actiontec T2200H Telus - Setup WiFi on the Actiontec T2200H
- Actiontec T2200H Telus - How to Reset the Actiontec T2200H
- Actiontec T2200H Telus - Actiontec T2200H Screenshots
- Actiontec T2200H Telus - Information About the Actiontec T2200H Router