Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the Actiontec T2200H

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The Actiontec T2200H router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Actiontec T2200H Guides

This is the wifi guide for the Actiontec T2200H Telus. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Actiontec T2200H

To get started configuring the Actiontec T2200H WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Actiontec T2200H, follow our Actiontec T2200H Login Guide.

Find the WiFi Settings on the Actiontec T2200H

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Actiontec T2200H router.

We begin this wireless setup guide for the Actiontec T2200H Telus router on the Home page. Start out by clicking Wireless Setup near the top of the page, and then Basic Settings in the left hand sidebar.

Change the WiFi Settings on the Actiontec T2200H

wifi wireless
This is the wifi setup page from your Actiontec T2200H router.

You should now be on the page you see above.

Begin by opening the drop down list labeled Select SSID and choosing SSID1.

Now enter your desired network name into the box marked SSID Name. This can be whatever you want, however we recommend avoiding any sort of personal information. To learn more, see our Wireless Names Guide.

After that, set the Security to WPA / WPA2. Then, open the drop down menu labeled WPA Type and set it to WPA2-Personal. Why are these the best options? Read our WEP vs. WPA Guide to find out.

Next, set the Encryption Type to AES.

Finally, make sure that the Security Key Type is set to Use Custom Key/Passphrase. Then, in the box below that, enter your desired network password. This can be anything you like, however a strong password consists of 14-20 characters and includes no personal information. For more help, check out our Choosing a Strong Password Guide.

Congratulations! You're done. Just be sure to click Apply before leaving the page.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Actiontec T2200H Info

Don't forget about our other Actiontec T2200H info that you might be interested in.

This is the wifi guide for the Actiontec T2200H Telus. We also have the following guides for the same router: