If you need to reset your Arcadyan LH1000 router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Arcadyan LH1000 Guides
This is the reset router guide for the Arcadyan LH1000 0.15.16r Telstra. We also have the following guides for the same router:
- Arcadyan LH1000 0.08.06r Telstra - Reset the Arcadyan LH1000
- Arcadyan LH1000 0.08.06r Telstra - Arcadyan LH1000 Screenshots
- Arcadyan LH1000 0.08.06r Telstra - Information About the Arcadyan LH1000 Router
- Arcadyan LH1000 0.08.06r Telstra - Login to the Arcadyan LH1000
Recover Password in Arcadyan LH1000
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Arcadyan LH1000
Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Keep in mind that this will completely reset your Arcadyan LH1000 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Arcadyan LH1000
Now you need to log in using the factory default username and password. You can find all of the information that you need in our LH1000 Login Guide.
Change Your Password
You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Arcadyan LH1000 Guides
This isn't our only Arcadyan LH1000 guide. We also have the following guides for this router.
This is the reset router guide for the Arcadyan LH1000 0.15.16r Telstra. We also have the following guides for the same router:
- Arcadyan LH1000 0.08.06r Telstra - Reset the Arcadyan LH1000
- Arcadyan LH1000 0.08.06r Telstra - Arcadyan LH1000 Screenshots
- Arcadyan LH1000 0.08.06r Telstra - Information About the Arcadyan LH1000 Router
- Arcadyan LH1000 0.08.06r Telstra - Login to the Arcadyan LH1000